I’ve been playing a lot with home automation, one of the interesting things that I have found are the products of Itead.cc and in particular their Sonoff home automation products. I just received one of their latest products the Sonoff LED Dimmer. Of course I don’t care about their software, I want to make it use the ESPEasy firmware, which will need a re-flash, so I stripped it down and it is time to share those pictures with the world. The next step is to make it work by attaching a TTL-USB adaptor to the header that is visible on the ESP8266 card that rises out of the main board.
I would comment that the build quality of the PCB is relatively poor, with lots of scrap solder and scratches on the bottom. The board has two channels attached for LEDs but there are also RGB points marked out on the PCB which are calling out to be tested.